In a glass washing machine having a glass carrier rotatable on an upright axis, half of the carrier is always in an access zone where glasses can be loaded onto the carrier and removed from it, the other half in a cleansing zone where detergent solution is discharged from a first set of spray nozzles and germicidal rinsing solution is discharged from a second set of nozzles. Upon actuation of a pushbutton switch, the carrier rotates through 180.degree., always in the same direction, then stops until the switch is again actuatd. Liquids are discharged from all nozzles while the carrier rotates. Detergent solution is recirculated, but fresh detergent solution is introduced during a predetermined portion of each period of carrier rotation.
Improved timing circuits (205), charge dispensing circuits (213,215), and methods and systems (100) for operation of warewashing equipment. According to one aspect of the invention the system operates on both door and conveyor types of machines. The system dispenses both an initial charge amount and a dose amount during normal operations. In door types of systems, only a single power/signal connection (109) needs to be made to the dispensing system; in one embodiment the warewash rinse power connection. Further, the system can dispense detergent at an interval of greater than once per cycle or operation.
A dispensing apparatus and method for dispensing detergent in a warewash machine. The rinse water spray systm or an alternate water source is monitored to determine if water is being supplied to the warewash machine. Once water is sensed being supplied to the machine, the apparatus determines whether the water is being supplied for a rinse cycle or a fill cycle. The amount of detergent dispensed is controlled based upon the determination of whether the water is being supplied in a rinse cycle or a fill cycle. If the apparatus determines that the water is being supplied for a rinse cycle, a make-up amount of detergent is dispensed upon completion of the rinse cycle. If the apparatus determines that the water is being supplied for a fill cycle, the washtank is pre-charged with the desired concentration of detergent during the fill cycle.
A machine for cleaning containers such as flat media carriers has inside and outside arrays of nozzles arranged to spray a cleaning solution onto containers supported on a spinning rotor in a chamber. The cleaning solution, a mixture of water and a detergent or surfactant, is prepared by drawing out surfactant directly from a surfactant bulk storage vessel by means of a metering pump. The flow rate of the water is measured by a flow meter and in combination with the metering pump, a proper amount of surfactant is injected into the water line to produce a mixture with a desired surfactant concentration for removing contaminants. The mixture is injected into the water line at a mixing control valve to ensure that the water and surfactant are thoroughly mixed before being injected into the media carrier. Where the wafer carrier is provided with multiple rinse manifolds for spraying the carrier, a flow meter and mixing control valve are provided in the water inlet line for each manifold and a separate metering pump is provided for injecting surfactant into each water line to ensure that a proper amount of surfactant is injected into each water line to produce a surfactant/water mixture with a desired surfactant concentration.
