A capacitance coupled, transmission line-fed, radio frequency MEMS switch and its fabrication process using photoresist and other low temperature processing steps are described. The achieved switch is disposed in a low cost dielectric housing free of undesired electrical effects on the switch and on the transmission line(s) coupling the switch to an electrical circuit. The dielectric housing is provided with an array of sealable apertures useful for wet, but hydrofluoric acid-free, removal of sw...

A capacitance coupled, transmission line-fed, radio frequency MEMS switch and its fabrication process using photoresist and other low temperature processing steps are described. The achieved switch is disposed in a low cost dielectric housing free of undesired electrical effects on the switch and on the transmission line(s) coupling the switch to an electrical circuit. The dielectric housing is provided with an array of sealable apertures useful for wet, but hydrofluoric acid-free, removal of sw...

A microwave radio frequency bidirectional energy flow-capable antenna method and related antenna of the physically conformal microstrip transmission line, traveling wave and leaky wave characterizations; the antenna is especially suited to vehicle mounting. The disclosed antenna operates in an EH.sub.1 or other above dominant mode energy wave propagation configuration, a configuration at least partially achieved by an array of selected-location radiating element shortings to an antenna-underlyin...

A digital cueing radio receiver system embodied using digital memory in lieu of analog delay lines and thereby avoiding delay line implementation difficulties. The cueing receiver system includes a wideband receiver portion providing an output signal employed for tuning a narrowband receiver portion of the system. Signal delay enabling use of the wideband receiver portion output signals for tuning the narrow band receiver portion selection frequency is provided by a digital memory circuit operat...

A method for selecting metal alloys as the electric contact materials for microelectromechanical systems (MEMS) metal contact switches. This method includes a review of alloy experience, consideration of equilibrium binary alloy phase diagrams, obtaining thin film material properties and, based on a suitable model, predicting contact electrical resistance performance. After determination of a candidate alloy material, MEMS switches are conceptualized, fabricated and tested to validate the alloy ...

A-Track is a tracking process that is driven by automatic target recognition techniques (ATR), mobility analysis using digital maps and exploitation of other constraining information. It is structured as an optimization problem amenable to the formalism from classical relaxation labeling algorithm. The novel combination of techniques in A-Track provides a new approach to the temporal problem of establishing and extending target tracks through a sliding time window involving a sequence of multipl...

A rechargeable battery energized unmanned aerial vehicle having surveillance capability and an ability to clandestinely collect propulsion and other energy needs from a conveniently located and possibly enemy owned energy transmission line. Energy collection is by way of a parked vehicle engagement with the transmission line in a current flow dependent, magnetic field determined, rather than shunt, voltage dependent, conductor coupling. Surveillance during both a parked or docked condition and d...

A locked hinge based technique for controllably holding surface-micromachined modules off the edge of a substrate for subsequent processing. The mechanism enables reliable, accurate, and low-cost fabrication of even complex multi layer flip-chip MEMS devices using for example only a simple two-layer module processing sequence, a sequence involving materials already in use in the process. The sequence is also free from the interference of an alignment-hindering sacrificial substrate member. The t...

A single dielectric barrier aerodynamic plasma actuator apparatus based on the dielectric barrier discharge phenomenon is disclosed and suggested for application to aerodynamic uses for drag reduction, stall elimination and airfoil efficiency improvement. In the plasma actuator apparatus non-uniform in time and space, partially ionized gasses are generated by one or more electrode pairs each having one electrically encapsulated electrode and one air stream exposed electrode and energization by a...

A cost considered arrangement for evaluating local illumination interference with operation of a night vision apparatus in for example the confines of an illumination inclusive aircraft cockpit. The evaluation is especially applicable to identifying interference between aircraft instrument lighting having infrared content for example, and night vision apparatus operation in the aircraft. The evaluation is cost is limited by use of a common household lamp night vision apparatus source calibrated ...