A power amplifier's complex pre-distortion curve is generated by decomposing a representation of an input signal, processing the resulting decomposed signals using analog techniques, and performing signal re-composition. In one implementation, two different halves of a transfer function corresponding to the amplitude characteristics of the amplifier are separately modeled and then combined to generate a control signal used to control a voltage-controlled attenuator that attenuates the input sign...

Multiple product terms (PTs) are combined with a multiple-input look-up table (LUT) to form a LUT-based Boolean term (LBT) that generates a Boolean output. Multiple LBTs are combined with one or more sum terms to form an enhanced generic logic block (EGLB) that can be programmed to operate, e.g., as a sum-of-products structure, where the EGLB structure can be repeated within a programmable logic device (PLD). Different multi-bit Boolean functions can be implemented in a single pass through each ...

A programmable logic device (PLD) with a programmable logic core, block memory, and I/O circuitry has one or more blocks of standard-cell logic (SLBs) that are integrated into the PLD design to enable each SLB to be programmably connected to any one or more of the programmable core, the block memory, and/or the I/O circuitry. The addition of standard-cell-based functional blocks creates a PLD with increased overall logic density, a net smaller die size per function, lowered cost, and improvement...

A signal to be amplified is provided in polar format comprising an amplitude component (210) and a phase component (212). The amplitude component (210) is used to bias the phase component (212). The gain of amplifier (220) depends upon the bias of the signal that it receives. Therefore, the bias given to the phase component (212) provides the envelope characteristics of the output signal (224) of amplifier (220). Both (or either) of the amplitude component (210) and the phase component (212) may...

The insertion phase or delay of an amplifier can be controlled by comparing signals from the amplifier path with signals from a corresponding reference path without requiring the overall signal delay through the reference path to nominally match the overall signal delay through the amplifier path. Amplifier and reference path signals can be combined to form a combined signal whose power is detected using a narrow-band, frequency-selective power detector. For given phase and delay offsets between...

A circuit is provided where impedance converters (41-48) are provided such that active components (P1 to P8) can be switched off without power from the other active components leaking away through those components which are switched off.

Frequency-independent and frequency-dependent pre-distortion is implemented using look-up tables to retrieve pre-distortion parameters. To compensate for changes in amplifier operating characteristics over time, fixed pre-distortion tables can be used by appropriately offsetting the index values used to retrieve the pre-distortion parameters. The overall amplifier gain as well as the biases applied to one or more amplifier stages are also preferably controlled. In addition, the frequency-indepen...

A radio transmitter for transmitting signals in a predetermined frequency band has a transmit filter and a compensating filter. The transmit filter filters a signal to be transmitted from the transmitter to suppress the transmission of parts of the signal outside the band. The compensating filter, e.g., operating in the digital domain, filters the signal upstream from the transmit filter, wherein the compensating filter is arranged to alter the signal to counteract at least one of a phase ripple...

Two or more microphones receive acoustic signals and generate audio signals that are processed to determine what portion of the audio signals result from (i) incoherence between the audio signals and/or (ii) audio-signal sources having propagation speeds different from the acoustic signals. The audio signals are filtered to reduce that portion of one or more of the audio signals. The present invention can be used to reduce turbulent wind-noise resulting from wind or other airjets blowing across ...

A set of interconnected delay stages, such as a voltage-controlled oscillator, has switch-controlled load circuitry connected to each output of each delay stage in the oscillator ring. In one embodiment, for each delay stage output, the switch-controlled load circuitry includes a switch, a transistor, and a current source. The switch is connected between the corresponding delay stage output and the transistor gate, the current source is connected between a power supply and the transistor drain, ...