An information processing terminal is attached to a transmitting and receiving unit which converts a reception wave signal from a network into a reception analog baseband signal and converts the reception analog baseband signal into a reception digital baseband signal in synchronization with a clock. The information processing terminal converts the reception digital baseband signal into reception data in synchronization with a clock, and transmission data into a transmission digital baseband sig...

A voltage controlled oscillation device includes a voltage controlled oscillator, fixed-frequency oscillator, frequency mixer, and frequency selector. The voltage controlled oscillator changes the output signal frequency in the microwave band in accordance with the input voltage of a frequency control signal. The fixed-frequency oscillator has a fixed oscillation frequency higher than that of the voltage controlled oscillator. The frequency mixer mixes the output signal from the fixed-frequency ...

A semiconductor microwave amplifier includes input- and output-side microstrip lines formed on a printed-circuit board to oppose each other, input and output electrodes formed on the microstrip lines to be parallel to the microstrip lines, a pair of ground electrodes formed in a direction perpendicular to the input and output electrodes to oppose each other, and a semiconductor amplification device connected to all of the electrodes. This amplifier further has a metal plate connected to the grou...

A voltage controlled oscillation device includes a voltage controlled oscillator, fixed-frequency oscillator, frequency mixer, and frequency selector. The voltage controlled oscillator changes the output signal frequency in the microwave band in accordance with the input voltage of a frequency control signal. The fixed-frequency oscillator has a fixed oscillation frequency higher than that of the voltage controlled oscillator. The frequency mixer mixes the output signal from the fixed-frequency ...

A direct digital synthesizer that suppresses phase jumps which would invite the generation of spurious signals. Out of phase data supplied by a phase accumulator, the value of any rounding error arising at the time of phase computation is entered into a variable delay circuit, and the phase of a signal obtained by phase-amplitude conversion is controlled to compensate for any phase jump in the output signal.

A phase lock loop circuit includes an oscillator, a digital mixer, a comparator, a loop amplifier, and a low-pass filter. The oscillator has an oscillation frequency controlled by a control voltage. The digital mixer is constituted by a digital element to output a difference frequency signal between an oscillation output from the oscillator and an input mixing signal. The comparator compares at least the phase of the difference frequency signal output from the digital mixer with that of a refere...

A leadframe includes: a frame rail; a die pad, disposed inside the frame rail, for mounting a semiconductor chip thereon; and a plurality of internal inner leads, which are disposed to surround the die pad and each of which has a convex portion on the bottom thereof. The frame rail and the internal inner leads are retained by a lead retaining member on their upper and/or lower surface(s).

There is provided a solder work material for forming solder-coated circuit boards, which is capable of preventing the malfunction of circuit that may be caused to generate by voltage noises that tend to be generated by the volumetrical expansion of the flux residue in a soldered laminated ceramic capacitor, etc. even under the environments where temperatures fluctuate widely (for example, -40.degree. C. to +85.degree. C.), or that may be caused to generate by voltage noises to be generated by th...

A leadframe includes: a frame rail; a die pad, disposed inside the frame rail, for mounting a semiconductor chip thereon; and a plurality of internal inner leads, which are disposed to surround the die pad and each of which has a convex portion on the bottom thereof. The frame rail and the internal inner leads are retained by a lead retaining member on their upper and/or lower surface(s).