AC to DC inverters that are formed from electronic switches, such as MOSFETs, that are controlled by gating pulses obtained from comparators. The comparators compare a varying signal against two closely spaced reference voltages so as to provide gating pulses with delays needed to prevent shoot-through in the electronic switches.

An inverter includes a pair of switching elements operated by control signals from a signal generator to take two-position action in the same phase or in opposite phases, and a coupling transformer to couple the control signals so that ON actions or ON and OFF actions of the switching elements are synchronized with each other more precisely than circuits of the past have been able to provide.

An inverter (1) for thin, flat products (2), especially printing substrates in a printing machine, with belts (7, 8) positioned over two deflection pulleys (3, 4, 5, 6) that are set together at 180.degree. between the deflection pulleys (3, 4, 5, 6). Such inverter is configured so that the product (2) and the belts (7, 8) move precisely in their reference positions. This is achieved by the fact that, in the transport direction (9), after a setting region (10) at least three guide rolls (11, 12, ...

An inverter having a large-capacity self-arc-extinguishing semiconductor element. Recovery capacitors recover energy stored in groups of elements for suppressing the rate of change in current, and are provided within a two-level or three-level inverter bridge. The thus-recovered energy is fed back to a d.c. voltage circuit by an energy regenerative circuit. The energy regenerative circuit controls the charging voltage of the recovery capacitors in proportion to the magnitude of a load current. I...

An inverter has a measuring part that measures an operating time such as the time interval from when a command to start a specified operation by an associated system until a signal indicating the completion of the operation is received. A comparing part compares this measured operating time with a threshold value stored in a memory and an abnormal condition is reported to a host system, depending on the result of the comparison.

In an inverter with a plurality of connection groups, each of which includes positive and negative points of connection for connection to a feeding direct current voltage source and an alternating current terminal, controllable main rectifiers are connected between the positive point of connection and the alternating current terminal and between the alternating current terminal and the negative point of connection, with a commutating capacitor having one terminal connected to the alternating cur...

In a parallel inverter system having a transformer with a commutating capacitor connected across its centre-tapped primary, a second commutating capacitor is connected in series with the first, an additional centre tapped auxiliary winding is provided on the transformer, and an auxiliary thyristor is provided between the junction of the said capacitors and the junction of the main thyristor of the inverter.

An inverter includes first, second, and third dc voltage sources, first and second switching elements which are connected in series to the first dc voltage source, a signal generator section for producing first and second control signals on the basis of the output voltage from the third dc voltage source, first and second signal level converter sections for converting voltage levels of the first and second control signals based on the output voltage from the second dc voltage source and thereby ...

An inverter includes an intermediate circuit, inverter bridge branches downstream of the intermediate circuit for outputting a power signal, and a controller operable for individually turning on and off the inverter bridge branches. The controller may individually turn on and off the inverter bridge branches as a function of an electrical quantity. The electrical quantity may be indicative of a voltage or a change in voltage occurring in the intermediate circuit during operation of the inverter....

An inverter circuit includes at least two semiconductor controlled rectifiers operatively connected between a source of direct current and an AC load to provide an output current with alternating polarity. A series combination of a commutation capacitor and a primary winding of a transformer connected across the semiconductor controlled rectifier applies reverse bias to the semiconductor rectifier. A first semiconductor uni-directional conductive element is connected in anti-parallel with each o...